Northfield
Filters
- Actuator (3)
- Adapter Plates (26)
- Air Tubes (5)
- Bushings (30)
- Diaphragm Chucks (26)
- Grease (2)
- Jaw Roughing Fixtures (5)
- Oil (2)
- Precision Air Chucks (117)
- Precision Collet Chucks (34)
- Pressure Switch (1)
- Regulator (2)
- Standard Jaw Blanks (156)
- Top Jaw Loading Pins (2)
- Valve (3)
- Vertical Baseplates (7)
- 0.020" with Pull-Down Action (1" Top Jaws) @ 100 PSI (3)
- 0.048" with Pull-Down Action (1" Top Jaws) @ 100 PSI (5)
- 0.050" with Pull-Down Action (1.5" Top Jaws) @ 100 PSI (2)
- 0.060" with Pull-Down Action (1.5" Top Jaws) (4)
- 0.060" with Pull-Down Action (2" Top Jaws) @ 100 PSI (4)
- 0.065" with Pull-Down Action (1.5" Top Jaws) @ 100 PSI (4)
- 0.120" with Pull-Down Action (2.5" Top Jaws) @ 100 PSI (4)
2'' Diameter Center Support Bushing
Northfield2'' Diameter Rear Split Bushing
Northfield2'' Diameter WET Center Support Bushing
Northfield2'' Diameter WET Rear Split Bushing
Northfield3 Inch Coolant-through Diaphragm Chuck
NorthfieldTotally Sealed with No Metal-to-Metal Moving Parts Coolant through or Air Blast-through (DPH 300W) DPH-300 Diaphragm Chuck
3 Inch Diaphragm Chuck
NorthfieldTotally Sealed with No Metal-to-Metal Moving Parts
3 Inch Model 300 Air Chuck
NorthfieldAlso available with 0.000010" (10 millionths) (.25µ); 0.000025" (25 millionths) (.64µ) & 0.000050” (50 millionths) (1.27µ) repeatability. Maste...
View full details3 Inch Model 300THS Through Hole Stationary Chuck
NorthfieldAlso available with 0.000025" (25 millionths) (.64µ) repeatability. Master Jaws move at perfect right angle to centerline of spindle.
3 Inch Model 300W Air Chuck with coolant through body
NorthfieldMaster Jaws move at perfect right angle to centerline of spindle.
3 Inch Model 350 Air Chuck
NorthfieldAlso available with 0.000010" (10 millionths) (.25µ); 0.000025" (25 millionths) (.64µ) & 0.000050” (50 millionths) (1.27µ) repeatability. Maste...
View full details3 Inch Model 350PL Pressure-Lok Air Chuck
NorthfieldMaster Jaws move at perfect right angle to centerline of spindle.
3 Inch Model 350SP Air Chuck with Sideports
NorthfieldMaster Jaws move at perfect right angle to centerline of spindle.
3 Inch Model 350THR Through Hole Rotating Chuck
NorthfieldMaster Jaws move at perfect right angle to centerline of spindle.
3 Inch Model 350THS Through Hole Stationary Chuck
NorthfieldMaster Jaws move at perfect right angle to centerline of spindle.
3 Inch Model 350W Air Chuck with coolant through body
NorthfieldAlso available with 0.000010" (10 millionths) (.25µ); 0.000025" (25 millionths) (.64µ) & 0.000050” (50 millionths) (1.27µ) repeatability. Maste...
View full details3 Inch Model 370 Air Chuck
NorthfieldMaster Jaws move at perfect right angle to centerline of spindle.
3 Inch Non-rotating Air Tube Diaphragm Chuck
NorthfieldTotally Sealed with No Metal-to-Metal Moving Parts
3" Diameter Locking Bushing and Knurled Knob
Northfield3" Diameter WET Locking Bushing and Knurled Knob
Northfield3'' Diameter Center Support Bushing
Northfield3'' Diameter Rear Split Bushing
Northfield3'' Diameter WET Center Support Bushing
Northfield3'' Diameter WET Rear Split Bushing
Northfield4 Inch Coolant-through 5/8" Counter Bore Diaphragm Chuck
NorthfieldTotally Sealed with No Metal-to-Metal Moving Parts Coolant through or Air Blast-Through DPH-400CB 5/8" Counter Bore Diaphragm Chuck